Getting lumber to the desired
thickness is necessary as not all planks would be of the ideal width and fit
for use. So you won’t be getting a good to use plank if you ain’t have a good
planer machine. Same goes for the jointer, you’d be needing it to have the
right edges for two planks to be joined. We’d, therefore, be comparing two
different types of woodworking machines for you to know what would be fitting
your needs.
A Benchtop Planer
Using benchtop planers to get lumber
surfaces at the desired thickness and level of smoothness to be used for the
relevant purpose. Benchtop planers are generally portable ones that help you
move them about quickly and even take along to offsite use. So, get your
benchtop planer for better chances to get a lumber thickness and surface, which
helps you use for your specific purpose. How cool would you look with a one cabinet
doo ½ inches thick while the other is an unevenly sawed 1 inch? Situations of
embarrassment like the one mentioned can be easily avoided by using a benchtop
planer.
The benchtop planer works out on
preset length and width to help you chop any extra parts off the plank or sheet
to be used with better functionality. Get identically sized planks to ensure uniformity
with a planer and never let that unevenness drop into your design and craft.
A Benchtop Jointer
Jointers, generally used for better
edges of the sheets of wood or planks you want to use. It’s only a countable
time when you get planks and sheets of wood with tips that are perfect to fit
in with the other one. In this case, you would use an adhesive to get both
planks together and finally get a larger plank to make your desired design. In
an alternative example, which is a prevalent scenario, you would need a
benchtop jointer. Like the planer which works over the surface and the sides to
get it to a desired length and width, a jointer works with sides of the planks.
Using a benchtop jointer, it is
easier for you to get sides that are of the desired length, and you can now fit
it with perfection.
What Should I Purchase?
It may be observed that the “nature
of usage” is what should be the driving force behind a purchase that you make.
I’d also suggest that you go for
something which is inaccessible in your vicinity or you have to wait long to
get it. For example, if you’ve got a benchtop planer with you but in a town
where the jointer is rented out, and you are to wait before it can be rented
out by you. In such a case, opt for a jointer or vice versa, whichever of the
two isn’t available or is difficult to lay your hands on.
So make a wise choice with all
rationalities, and yes, one last thing, always gets some extra accessories for
timely replacements if any of them breaks down.
Comments
Post a Comment