Boat Docking Supplies: Boat Fender Accessories Are A Must-Have!

 

Have you heard of mooring a boat? Mooring correctly in port is a guarantee of safety both for our boat and for the port itself and for our dock neighbors. Not occasionally, but the seafarers are forced to check moorings when conditions get ugly. Let's save them work with by securing our boats well and go home in peace. And, for this we need the best boat docking supplies.

Mooring the boat well and leaving it well protected with the help of boat fender accessories such as boat fenders, boat dock fender holder does not offer any complications. It is enough to know three basic knots and their specific us. Boat docking supplies must include the most suitable ropes for it.

 

Let's check out the boat docking supplies:

 

Ropes

Ropes are a salient feature in choosing boat docking supplies. Polyamide or polyester three-strand ropes are generally used for lashings. They are the ones that are most resistant to ultraviolet rays. It is necessary to have a complete set on board and periodically check its status. Each rope, depending on its use, receives a specific name:

 

·         Long: one for bow and one for the stern. They prevent the boat from moving forward or backwards when we are buckled. In point berths, they will be used aft, one on each side to the dock cleats.

·         Springs: they must be two, at least equal to or greater than the length of the boat. If they are charged, they bring the bow or stern closer to the dock.

·         Beams: they keep the boat attached to the dock when the wind blows from there. We can have two, but generally, one is enough at mid-length. It does not have to be very long, as it prevents the boat from separating from the dock.

·         Elbow patches: they must be longer than the crossbars since they are tied to exterior buoys and serve to prevent the boat from hitting the jetty when we cross when the wind comes from outside. It is a rare situation in marinas, but it never hurts to have at least one.

Let us, therefore, remember what moorings we must carry on board: at least two lengths, two springs and a cross, which we will always keep well adjoined in the cockpit trunks and ready to be used.

 

Boat fender accessories

Boat fenders are the bumpers of our boat. Therefore, we must choose the most appropriate boat fender accessories. Generally, the cylindrical fenders are enough. But if we have space on board, it never hurts to have a spherical or bumper. Place it where it is required in case of emergency, and a half-moon to protect the bow of the dock tied on end. There are also flat mat type to protect flat surfaces. The essential thing to be effective is to place them at the proper height.

If we moor on a dock, the correct thing to do is to place it just above the waterline so that the boat fender coincides with the most salient part of the dock or jetty. If we join boat fenders with other boats, we must place at least one boat dock fender holder in the beam of our boat and the neighbor's hull.